Here are eight steps to save money on your electrical bill:

1. Conduct an Energy Audit: Identify areas where you are using the most electricity, and determine which appliances or devices are using the most power.
   
2. Use Energy-Efficient Appliances: Choose appliances that are Energy Star certified or have high energy-efficiency ratings. These will use less electricity and can save you money over time.
   
3. Install a Programmable Thermostat: Adjust the temperature in your home based on your schedule. Set the temperature to be lower when you're not at home or during the night.
   
4. Switch to LED Lighting: Replace incandescent bulbs with LED bulbs, which use less electricity and last longer. Also, turn off lights when you leave the room.
   
5. Unplug Devices When Not in Use: Electronics and devices continue to use electricity even when turned off. Unplug chargers, televisions, and other electronics when not in use.
   
6. Use Power Strips: Plug multiple devices into a single power strip, which can be turned off when not in use, rather than unplugging each device separately.
   
7. Maintain Heating and Cooling Systems: Change air filters regularly, and have your HVAC system serviced annually. A well-maintained system will run more efficiently, saving you money on your electric bill.
   
8. Seal Air Leaks: Caulk and weather-strip windows and doors to reduce drafts and prevent heat loss in the winter and cooling loss in the summer.
   

By following these steps, you can reduce your electricity usage and save money on your electric bill.  Call Spokane valley electrician to help you with your power needs

The voltage required for a residential garage depends on the specific electrical needs of the equipment and appliances that will be used in the garage.
Most homes in the United States have a standard electrical service of 120/240 volts. This means that there are two hot wires each carrying 120 volts, and a neutral wire that carries 0 volts. The two hot wires are used to provide a 240-volt supply to high-power appliances like electric water heaters, electric dryers, and electric stoves.
For most residential garage applications, a 120-volt electrical service is sufficient. This is because most garage appliances, such as lighting, power tools, and small appliances, are designed to run on 120 volts. However, if you plan to use high-powered equipment, such as an electric car charger, you may need a 240-volt electrical service.
It's important to have a licensed electrician evaluate your garage's electrical needs and provide recommendations for the appropriate voltage and electrical service. They can help ensure that the electrical system is properly installed and meets local building codes and safety requirements.

If you're planning a basement renovation project that involves electrical work, it's always best to hire a licensed and experienced residential electrician. Here are some reasons why:

1. Safety: Electrical work can be dangerous, and mistakes can lead to fires, electric shock, or other hazards. A licensed electrician has the training and knowledge to do the work safely and effectively.
   
2. Code compliance: Electrical work must meet local building codes and regulations, and a licensed electrician is familiar with these requirements. They can ensure that your electrical system is installed correctly and up to code.
   
3. Experience: An experienced electrician has seen and worked on many different types of projects and knows how to handle any issues that may arise. They can provide advice on the best materials and practices to use for your project.
   
4. Efficiency: A professional electrician can complete the work more efficiently than a DIY project, saving you time and money in the long run.
   
5. Warranty: When you hire a licensed electrician, they will typically offer a warranty on their work. This gives you peace of mind knowing that the work is guaranteed.
   

Overall, hiring a residential electrician to wire your basement renovation project is the safest and most efficient option. Be sure to choose a licensed and experienced electrician and get multiple quotes to ensure you get the best value for your money.

​

If you need a commercial electrician in Spokane Valley, Washington, you can follow these steps:

1. Determine your electrical needs: Determine the scope of the electrical work needed, such as new installations, repairs, or upgrades.
   
2. Research electricians: Search for commercial electricians in Spokane Valley who specialize in the type of work you need. Check online reviews and ratings to ensure that the electrician is reputable and reliable.
   
3. Check for licensing and insurance: Make sure the electrician you choose is licensed, bonded, and insured. This protects you from liability if anything goes wrong during the project.
   
4. Get estimates: Contact a few different electricians and request estimates for the work you need. Compare the estimates and choose the one that fits your budget and timeline.
   
5. Schedule the work: Once you have chosen an electrician, schedule the work to be done at a time that is convenient for your business. Make sure to communicate any special requirements or concerns you may have.
   
6. Prepare for the electrician's arrival: Make sure the area where the work will be done is clear of any obstacles and that any necessary access points are available. Turn off power to the affected areas if necessary.
   
7. Communicate with the electrician: When the electrician arrives, communicate clearly about the work that needs to be done and any concerns you may have. Provide any necessary information or documentation, such as blueprints or permits.
   

By following these steps, you can find a reliable and experienced commercial electrician in Spokane Valley to help you with your electrical needs.

If you are in need of an emergency electrician in Spokane Valley, WA, here are some steps you can take:

1. Check for immediate danger: If there is a risk of electrical shock or fire, immediately turn off the power to the affected area and call 911.
   
2. Call a 24-hour electrician: Look for a licensed electrician who offers emergency services and is available 24/7. You can search online or check with your local phone directory to find a list of emergency electricians in your area.
   
3. Explain the situation: When you contact the electrician, explain the situation in detail, including the type of electrical problem you are experiencing and any steps you have already taken to address it.
   
4. Provide access to the area: Make sure the electrician has clear access to the area where the problem is located. This may require moving furniture or clearing clutter to allow the electrician to work safely and efficiently.
   
5. Stay safe: If there is a risk of electrical shock or fire, stay away from the affected area until the electrician arrives. If necessary, turn off the power to the affected area and wait for the electrician to arrive before attempting any further repairs.
   

By following these steps, you can quickly and safely address any emergency electrical problems in your home or business in Spokane Valley, WA.

​When it comes to choosing the best EV charger for your needs in Spokane Valley, WA, there are several factors to consider, including the type of vehicle you have, your budget, and your charging needs. Here are some popular options:

1. Level 1 Charger: This is the simplest and most basic type of EV charger that can be plugged into a standard 120-volt household outlet. It provides a slow charge rate of about 3-5 miles of range per hour and is best suited for those who drive short distances or have a backup charging option.
   
2. Level 2 Charger: This type of charger provides a faster charge rate of up to 25 miles of range per hour and requires a 240-volt electrical circuit. They are more expensive than Level 1 chargers but are ideal for those who have longer commutes or want to quickly charge their vehicle.
   
3. DC Fast Charger: This type of charger provides the fastest charge rate of up to 80% in 30 minutes, but they are more expensive and require professional installation. DC Fast chargers are typically found at public charging stations and are ideal for those who travel long distances or have an electric vehicle with a larger battery capacity.
   

The best EV charger for you depends on your specific needs and budget. Consider factors such as the charging time, cost, installation, and any features that may be important to you. Additionally, it's important to consult with a licensed electrician to ensure your home's electrical system can safely accommodate the charger.